System Information Document
Date: 10/11/2007
To: All NEc Elite 48/192, IPK, Electra Level 2
From: Tech Services
RE: How to change Hold Recall Selection
This bulletin applies to all NEC Elite 48/192, IPK, Electra Level 2
From any phone with a display.
Press Feature (FNC)
Dial # 0 * 8 9 7 4 on the keypad.
Press Line Key #1 (refer to attached document for location of line keys)
Press Line Key #1 (refer to attached document for location of line keys)
Dial 03 on keypad
The screen should look similar to this example
03 : HOLD RECL 25s
The 2 digits before the s shown on the display will indicate the current hold recall time. 25 seconds is the default selection
Using the line keys of your telephone selcet the new recall time
Line key 1 = 25 seconds
Line key 2 = 45 seconds
Line key 3 = 60 seconds
Line key 4 = 90 seconds
Line key 5 = 120 seconds
Line key 6 = 180 seconds
Line key 7 = 240 seconds
Line key 8 = No Limit assigned
Press Transfer (TRF)
Press Speaker to exit programming mode.